- Download Whole Catalogue (Please Right Click > Save File As)
|
When the pressure reaches the
value set with the compensator,
the flow is reduced automatically
and the set pressure is maintained.
The pressure and flow are controlled manually. |
|---|
|
The pressure can be controlled
according to the pilot pressure. |
|---|
|
Two Pressure-Two Flow Control By means of the sequence valve, two stage flow rate can be obtained and each flow rate has the different pressure eventually enabling energy savings. |
|---|
|
Solenoid Cut-Off Control
An unloading solenoid valve is used to minimize the lost energy when the pump output is not required. Heat generated is very small. |
|---|
|
Two Pressure Cut-Off Control By means of "ON" "OFF" control of solenoid valves, two different pressure cmpensating types can be obtained. |
|---|
|
Load Sensing Control
The "HL" compensator is used for load sensing circuits and is a true load sensor. This is the "B" compensator with a pin in the compensator spool. The pin prevents pilot flow from entering the circuit which will eliminate creeping of the load. The "HL" compensator will let the pump deliver a constant flow rate to the circuit by providing an adjustable △ P across the customers orifice or valve. The pump will operate at 17.2~27.5 bar (250-400 psi) above"Load pressure". |
|---|
